Versions Compared

Old Version 105

changes.mady.by.user Tatiana Bieliakova

Saved on

compared with

New Version 106

changes.mady.by.user Tatiana Bieliakova

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.



Info

Update repository: rel50. In case of automatic upgrade, make sure to specify the current repository.

Link for sharing: https://confluence.wildix.com/x/ToBtB

Other changelogs: https://www.wildix.com/new-releases-and-updates/

...

Note

Starting from WMS v. 5.02.20210223.1, the weekly automatic upgrade is enabled by default for the Stable repository.

Important notes!

  • For PBXs with previously enabled auto-upgrade, there are no changes
  • Auto-upgrade can be disabled once the upgrade is completed. But it will be enabled by default again after each new upgrade


Warning
Important for WMS network in WMS 5.03:
  1. For correct behavior of WMS network, first update Server PBX and then Client PBXs
  2. In case of updating from WMS versions lower than 5.02, make sure that your WMS Network credentials correspond to the new security requirements and only then proceed with updating the PBXs:
    • Login: 13 characters, it's required to use lowercase letters and digits [a-z 0-9]
    • Password: 24 characters, it's required to use lowercase, uppercase letters and digits [A-Z a-z 0-9] 
  3. After upgrade WMS network to 5.03, for the correct work of calls between nodes, the following ports must be opened: 443 (or custom secure port) + RTP ports (on SIP-RTP page)


Warning

Starting from April 04, WMS Stable version 5.04.20220309.1 will be gradually available according to the schedule presented below:

  • April 04: upgrade available for the PBXs related* to the UK, the Netherlands, Estonia, Finland, Denmark, Sweden, India, Australia
  • April 06: United States, Canada, Latin America
  • April 11: Germany, Austria, Switzerland
  • April 13: Italy
  • April 15: France, Belgium, Spain

*Note: PBX is considered as "related to a certain country", based on the Wildix sales manager assigned to the Partner, and not based on the physical location of the system or the customer.

If you want to try the version right away, before the official rollout, you can use rel50rc repository to manually update your PBXs.

WMS Release Candidate Version 5.04.20220309.1 Date: 10 March 2022

New Features

...

  • Make sure the Support Refer and Hold option in Advanced settings is enabled, otherwise Play remote MoH won’t work.

[WMS-11389] - sys: removed VPN tunnel usage from WMS network logic (in WMS 5.03 it was used for backward compatibility to work with PBXs with WMS 5.02 or older)

After upgrade to WMS 5.04 all PBXs of WMS network have to be upgraded to WMS 5.04.20220304.2

[WMS-11786] - sys: updated RTPengine to the latest version for improved stability

...

[WMS-13057] - sys: fixed a rare issue in which SMS could not be sent due to memory leak in SMS daemon

[WMS-13098] - x-ca: fixed an issue in which x-caracal failed to display long time range reports (e.g. Agent Summary, Distribution) on highly loaded PBX

Note:

The following limits for maximum allowed days range were applied:

  • Less than 500K records - max 180 days
  • 500K - 700K records - max 120 days
  • 700K - 900K records - max 60 days
  • 900K and more - max 31 days

To set custom limit (for example 50 days), add the following parameter to /var/www/x-caracal/.env file:

MAX_ALLOWED_DAY_RANGE=50

[WMS-13157] - sys: fixed an issue of muted audio during a call and call drop after migration from Hardware PBX to Cloud PBX, caused by incorrect public IP configuration

...

Now the option is checked by default.

New W-AIR firmware version 0530b8

[WMS-13526] - dev: new W-AIR firmware which includes fixes of the following issues:

  • W-AIR base automatically rebooted after W-AIR handset received an incoming video call
  • W-AIR base crashed with error 43
  • W-AIR base stations got wrong RFPI Address after adding new base stations, which led to loss of handset registrations
  • dropped calls while moving between base stations because of issue with LAN sync

WMS Stable Version 5.03.20220127.1 Date: 27 January 2022

...

[WMS-13143] - dev: fixed an issue in which WorkForce didn’t play opus files if user language was English, after upgrade to WMS 5.03.20211222

WMS Stable Version 5.03.20211222.2 Date: 22 December 2021

New Features

...

  • increased background noise and too loud default microphone level in handsfree mode
  • muffled sound between two WorkForce devices
  • background noise in the handset's speaker
  • muffled audio on WiIdix DuoLED and DuoLED BT headsets connected to WorkForce if users spoke at the same time
  • WorkForce volume level higher than on WP480GR3

WMS Stable Hotfix Date: 18 October 2021

Additional package: cw-5.03.20211012.1

Fix

[WMS-12263] - sys: fixed an issue of call drop in Collaboration and no media on WP which occurred when Collaboration user, being on a call with WP phone user, turned on personal call recording after completion of attended transfer under the following conditions:

  • the system was upgraded to WMS 5.03
  • g729 transcoding was enabled in /etc/callweaver/sip.conf

WMS Stable Version 5.03 Date: 12 October 2021

Additional package: cw-5.03.20211012.1

Fix

[WMS-12317] - classound: fixed a rare one-way audio issue on CLASSOUND calls, which occurred due to incorrect processing of RTP Keep Alive by a remote carrier

...

[WMS-12291] - sys: updated the SSL certificate to ensure correct work of Wildix services

WMS Stable Version 5.03.20210927.4 Date: 27 September 2021

Improvements

...

[WP-148] - dev: fixed an issue in which microphone volume on WorkForce got much higher after WMS upgrade to 5.03

WMS Stable Version 5.03.20210910.1 Date: 10 September 2021

Fixes

...

  • The issue affected FXS r3 gateways with firmware versions 27.81.10.15, 27.81.10.16, 27.19.10.15, 27.19.10.16.

WMS Stable Version 5.02.20210722.1 Date: 3 Aug 2021

Fixes

[WMS-11208] - sys: fixed no media issue after attended transfer in case transcoding was enabled between codecs g729 -> g729 -> g711

[WMS-11554] - wms: fixed incompatibility of Collaboration Web Phone with Google Chrome v. 93 (due to be released on Aug 31)

WMS Stable Version 5.02.20210518.1 Date: 19 May 2021

Hotfixes

[WMS-11220] - wms: fixed an issue with impossibility to access Collaboration via Google Chrome v 91 if:

...

WMS Stable Hotfix Date: 14 May 2021

Additional package cw 5.02.20210514.1

[WMS-11242] - sys: fixed an issue in which under rare conditions it was impossible to receive/ make calls, after WMS release 5.02.20210416.1

...

[WP-45] - dev: fixed an issue with Voicemail notifications not working on WorkForce 

WMS Stable Hotfix Date: 26 March 2021

Additional package: cw 5.02.20210326.1

[WMS-10827] - sys: fixed an issue with PBX engine being restarted by monit in some rare conditions after upgrade to WMS 5.02

WMS Stable Version 5.02.20210312.1 Date: 12 March 2021

Fixes

[WMS-10798] - col: fixed an issue with Collaboration Native App v. 2.1.6 not working after upgrade to WMS 5.02

...

  • fixes an issue with W-AIR Base Stations restart on each SIP login or logout
  • adds possibility to get location of the nearest W-AIR Base Station in case of emergency alarm triggered on W-AIR Handset (init. ticket WMS-9671)

WMS Stable Version 5.01.20201006.1 Date: 13 October 2020 

Improvements

...

[WMS-9672] - dev: new firmware for W04FXO r3 v. 27811011 includes performance optimization

WMS Stable Version 5.01.20200923.1 Date: 23 September 2020

Fixes

...

WMS Stable Version 5.01.20200914.1 Date: 16 September 2020

The current version includes the following changes along with generic security improvements:

New Features

[WMS-9325] - wms: added possibility to access storages and NTP Server menus before PBX activation

...