Page Comparison

<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

W-PA SIP Public Announcer is used to broadcast emergency messages and communication in large environments such as shopping malls, supermarkets, airports, hospitals. The device has 10 Watt audio output and it still allows you to connect external loudspeakers, and an external microphone. It can also act as a relay for activating door release switches or door locks via 1 embedded short-in detect port and 1 short-out control port (See Appendix 1 for more information).

...

• 1 x W-PA SIP Public Announcer
• 1 x ground screw

W-PA Overview

Front panel

...

1 - PC interface: connect the device to PC (optional)

...

8 - Ground screw: connect external parts with metal housing to this interface to prevent static electricity and other interference caused the equipment to work abnormally

Rear panel

Image Removed

1 - Speaker interface: according to the device input voltage adaptive output maximum power; 4Ω speaker, POE / 8W, 12V / 10W, 18V / 20W, 24V / 30W. The greater the horn impedance, the smaller the output power. Suggested wire diameter: 18AWG or larger diameter

...

1. • Press Volume - key for 3 seconds to obtain its IP address

   • IP address will be playbacked through the speaker 

     Warning
     Important: to be able to get W-PA IP address, you have to connect external speakers via Speaker interfaces/ a microphone via Microphone interface.

     
     

   • Use first time access credentials: admin : admin
     
     

2. After you log in W-PA web interface: 

   • Go to System -> Auto Provision -> Static Provisioning Server and fill in the following information:

     • Server Address: enter your PBX host address or public IP
     • Configuration File Name: ?action=setaps
     • Protocol Type: HTTPS
   • Click Apply
   Image Removed

1. Go to System -> Tools -> Reboot phone
2. Click Reboot key
3. Confirm the reboot by clicking OK

...