Page Comparison

...

• Use five or super five network cable to connect your W-PA to the network
• Connect the cable to WAN (PoE) port
  

Provisioning of W

...

-PA 

Wildix supports different provisioning modes:

• WMP provisioning: (the simplest mode) can be applied also for Cloud PBX and for connecting remote devices (assign devices to the PBX from the Portal)
• Auto-provisining: for local devices (cannot be used for Cloud PBX and for remote devices behind NAT / Firewall)
• Remote provisioning: this mode can be used for Cloud PBXs and for connecting remote devices behind NAT / Firewall

Read the guide: https://manuals.wildix.com/provisioning-of-wildix-devices/ 

Below remote provisining mode is described, as it is the most difficult mode.

Remote provisioning

1. Go to WMS -> Devices
2. Click Add
3. Enter MAC address of the device (you can find it on the device label)
4. Click Next. You will be forwarded to the provisioning window with the device information (MAC, Type and Provisioning URL)
5. Click Finish
   
6. Access W-PA web interface for configuration settings:
   
   • Press Volume - button for 3 seconds to obtain its IP address
   • IP address will be playbacked through the speaker
     
   • First time access credentials: admin : admin
     
7. After you log in W-PA web interface, go to System -> Auto Provision -> Static Provisioning Server and fill in the following information:
   • Server Address: enter your PBX address (maartentest.wildixin.com:443 in the example)host address or public IP
   • Configuration File Name: ?action=setaps
   • Protocol Type: HTTPSUpdate Interval: Set the interval of update in case you choose Update at Time Interval update mode in the next step
   • Update Mode: Select the update period: Update After Reboot / Update at Time Interval
   • Click Apply
     Image Modified

...

Reboot 

...

1. • 
     
     
2. Go to System -> Tools -> Reboot phone
3. Click Reboot button
4. Confirm the reboot by clicking OK
5. You will hear two audio signals: the first one is played at the beginning of the reboot, the second one is played after it is completed

Provisioning 

Auto-provisioning

W-PA SIP Paging Gateway can be auto-provisioned in case it is connected to the local LAN or remote network via VPN.

Please refer to the Provisioning of Wildix devices Guide for detailed information.

Semi-automatic provisioning

Semi-automatic provisioning is used for remote/unreachable devices behind NAT/Firewall:

1. Go to WMS -> Devices
2. Click Add
3. Enter MAC address of the device (you can find it on the device label or check it in W-PA web interface -> System -> Information -> Network -> MAC)
4. Click Next. You will be forwarded to the provisioning window with the device information (MAC, Type and Provisioning URL)
5. Click Finish
   

...

1. Go to WMS -> Devices 
2. Choose your W-PA from the list of available devices and click Assign to user

3. Enter the extension number of a user you want to assign the device to

   Note
   Note: you can use the existing extension number assign W-PA to an existing user or create a new one .in WMS → Users

   
   

Public announcer function

...