...
| width | 60% |
|---|
This manual explains how to log in and to configure WSG24POE via administrator web interface of the switch.
Version created: June 2016
Version updated: December 2017
INDEX:
| Table of Contents |
|---|
Initial connection
Turn on the switch
Before powering on the switch, make sure the voltage is correct. The power supply socket is situated on the back panel of the switch.
Plug the power supply into the switch: the power indicator on the front panel must turn on.
LED indicators and ports description
Front panel:
Ports description:
10/100/1000Mbps RJ45 ports (1-24): connect devices with 10 / 100 / 1000Mbps bandwidth.
SFP ports (SFP1, SFP2): install SFP module and connect devices with 1000Mbps bandwidth.
Console port (Console): connect a serial port of PC / terminal for monitoring and configuring the Switch.
Reset button (Reset): (device is connected to power supply) press and hold the button for about 5 sec.
LEDs description:
LED | Color | Status | Description |
PWR | Green | ON | Power is supplied |
OFF | No power | ||
Link / Act / Speed (1-24) | Orange (10/100Mbps) | ON | A valid link is established |
OFF | No link is established | ||
Green (1000Mbps) | Blinking | Data packets are received or transmitted | |
Link / Act / Speed (SFP1,2) | Green | ON | A valid link is established |
OFF | No link is established | ||
Blinking | Data packets are received or transmitted | ||
PoE (1-24) | Yellow | ON | A PoE PD (Powered Device) is connected to the port |
OFF | No PD is connected to the port | ||
Blinking | The PoE power circuit may be in short or the power current may be overloaded. |
Access web interface
The default settings of the Switch:
Default IP address: 192.168.2.1
Default user name: admin
Default password: admin
(PC must be in the same network as the switch: 192.168.2.xxx)
Connection of devices
Connect devices to the ports of the Switch using a network cable (check the datasheet for more information). 1-24 ports have power supply function (see the datasheet for the max power output)
Auto Voice Vlans
For automatic setting of Voice Vlans, please refer to the document: https://confluence.wildix.com/x/PgAVAQ
Configuration
Home
The home page displays the following information:
Configuration menu (on the left)
CPU and memory info (on the top)
Status of ports
...
| width | 25% |
|---|
...
| borderColor | lightgrey |
|---|---|
| borderStyle | solid |
INDEX:
...
Quickly Set
Create a VLAN
Add port in VLAN
Set the basic information and change the switch login password
...