...
The paging method is selected automatically by the system, no special configuration is required - the PBX administrator must only create a Paging group, as described in Chapter Paging group. Paging over RTP is preferred (if possible based on network configuration and available devices), if it is not available, paging is sent via SIP calls.
...
- Works only as long as the PBX and the devices are in the same network
- Is supported by the following Wildix devices: W-PA, WP4X0, START (ex WP410), WelcomeConsole, WorkForce, WP600AXX, Vision, SuperVision
...
Devices are called in the following priority (if there are 2 registered devices with the same priority, only 1 device will receive a call):
- WP4X0, START, WorkForce, WelcomeConsole desk phones
- WP600AXX, Vision/ SuperVision desk phones
- W-AIR handsets
- Web (Chrome)
- Others
...