...
Info |
---|
x-hoppers Changelog: new features and improvements for x-hoppers. Other changelogs: https://www.wildix.com/new-releases-and-updates/ x-hoppers documentation: https://wildix.atlassian.net/wiki/x/RCDOAQ Link for sharing: |
Note |
---|
How to update:
|
Vision App Version 3.07.67, Firmware Version 49.145.5.84 Date: 23.03.2023
Improvement
[WMS-16277] - vision: improved chat performance to avoid an occasional issue when chat unexpectedly crashed if a message contained an attachment
Fix
[WP-244] - vision: fixed an issue of random restarts of the app in some rare cases
x-hoppers Date: 07.06.2023
New Feature
[WMS-17057] - x-hop: added possibility to transcribe content of x-hoppers conference and post it in x-bees conversation on behalf of the user who is speaking
How-to:
- Create x-bees conversation with users that are in the x-hoppers conference
- Copy x-bees conversation ID (available in the URL)
- Add following data to the /rw2/etc/pbx/x-hoppers.json file:
- "audio_conf_id": "ID of the x-hoppers conference",
- "xbees_channel_id": “ID of the x-bees conversation”
Note:
- If user talks for more than 60 seconds without a pause, the message is not transcribed.
- The support starts from WMS Beta 6.03.20230606.1.
x-hoppers Date: 02.06.2023
New Feature
[WMS-16447] - x-hoppers: added possibility to post Veesion alerts to x-bees conversation
Requirements:
- x-hoppers integration with Veesion
- WMS Beta 6.03.20230602.1 or higher
How-to:
- Add a user in WMS with email address
- Create x-bees conversation with the user and copy the conversation ID (available in the URL)
- Add following data to the /rw2/etc/pbx/x-hoppers.json file:
- “store_veesion_id”: “ID of the store”
- “xbees_channel_id”: “ID of the x-bees conversation”
- “veesion_user_extension”: “enter extension of the user added in WMS”
When there is an alert from Veesion, the relevant message, containing alert type, date, time, camera IP, ID of the camera and group, as well as video attachment, is sent to x-bees conversation.
Documentation: x-hoppers integration with Veesion
x-hoppers Date: 01.06.2023
Improvement
[WMS-
...
17236] -
...
sys:
...
Vision App Version 3.07.65 Date: 01.02.2023
Improvement
[WP-236] - vision: improved stability of the application to prevent it from freezing with "Phone isn't responding" error
Vision App Version 3.07.61 Date: 01.12.2022
Fixes
[WP-230] - vision: fixed an issue of low volume of outgoing audio during some calls on Vision phone
[WP-234] - vision: fixed an issue in which Vision display didn’t wake from sleep mode when an incoming call was ringing
Vision App Version 3.07.54 Date: 26.10.2022
Fix
[WMS-15485] - vision: fixed an issue in which Wizyconf links were processed incorrectly
Vision Firmware Version 49.145.5.81 Date: 21.10.2022
Improvement
[WP-224] - vision: added a preinstalled Aurora Store on Vision device
...
added the possibility to increase x-hoppers volume in case of noisy environment.
How-to:
- Add the following parameters to the section [default_bridge]of the file /etc/callweaver/confbridge.conf: default_listening_volume=6
Where 6 is the preferred volume. The maximum value is 10. The default value for both parameters is 0.
Note: The support starts from WMS Beta 6.03.20230601.1.
x-hoppers Date: 25.04.2023
New Feature
[WMS-15837] - x-hop: added possibility to record in-store conversations for x-hoppers and listen them via CDR-View
How to enable:
- Add the following key to the /etc/systemd/system/pbx-data-engine.service.d/override.conf file:
--conf-recording
# vi /etc/systemd/system/pbx-data-engine.service.d/override.conf
[Service]
ExecStart=
ExecStart=/usr/sbin/pbx_data_engine.py --conf_recording - Reload systemd and restart the service to apply the changes:
# systemctl daemon-reload
# systemctl restart pbx-data-engine
Note:
- The support starts from WMS Beta 6.03.20230424.1.
- The feature works only if there is an x-hoppers licence available.
- Recording starts when user unmutes himself in the conference and starts talking.
Limitations:
- Recording is not automatically stopped if user forgets to mute the headset.
- For a new user who joins the conference, recording is automatically started even if the user is muted, and the recording file of about 3 seconds is saved on the PBX.
Fix
[WMS-16743] - x-hop: fixed an occasional issue in which x-hoppers headsets didn’t automatically rejoin the broadcast after a) having a call, b) going on hold, or c) going out of range
x-hoppers Date: 08 March 2023
New Feature
[WMS-15807] - x-hoppers: added possibility to set up integration with Veesion, which allows to detect theft in retail stores in real time
Documentation: x-hoppers integration with Veesion
Fix
[WMS-15519] - x-hoppers: fixed an issue in which call was shown as unanswered in CDR-View when the headset was connected to conference
x-hoppers Date: 30.01.2023
Fixes
[WMS-15519] - x-hoppers: fixed an issue in which call was shown as unanswered in CDR-View when the headset was connected to conference
Note: The support starts from WMS Beta 6.02.20230130.1.
x-hoppers Date: 28.11.2022
[WMS-15598] - sys: added a new provisioning parameter for x-hoppers headsets that allows controlling silent charging setting
Requirements:
- W-AIR firmware starting from v 650b2
WMS 6.01.20221122.1 or higher
- Activated x-hoppers
How-to:
Add the following parameter with one of the values to the [wildixair] section of /rw2/etc/provision.conf file:
WairSilentcharging = on | off | deactivated
- on: only LED indication while charging
- off: normal mode with LED indication and audio while charging
- deactivated: headset is disconnected and can’t receive calls while charging
By default, silent charging is set to On.
New Firmware
New W-AIR firmware v 650b2
[WMS-15276] - dev: retail mode is now automatically enabled on x-hoppers headsets if x-hoppers is activated on a PBX
The following settings are pre-configured:
- Retail Mode: On
- Audio feedback: Voice
- Silent charging: On
- Silent mode: Off
Note: The support starts from WMS 6.01.20221122.1 or higher
Documentation: x-hoppers Admin Guide
x-hoppers Date: 24.10.2022
Improvement
[WMS-14707] - x-hop: simplified the initial process of x-hoppers setup
- Renamed wair-retail-helper into to x-hoppers-helper
- x-hoppers-helper service now starts automatically if x-hoppers is activated on a PBX
Note: The changes are applied from WMS 6.01.20221019.4 or higher.