Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
The Guide describes and explains how to provision Wildix devices. WMS Version: 5.0X / 46.0X Updated: April 2021January 2023 Permalink: https://wildix.atlassian.net/wiki/x/OxnOAQ |
Table of Contents |
---|
Introduction
There are several provisioning modes supported by WMS:
- Auto-provisioning (available only for Hardware and Virtual PBXs):
For devices connected to the local LAN or remote network via VPN.
For remote/ unreachable devices behind NAT/ firewall.
- Auto-configuration via auto.wildixin.com:
Automatically add Wildix devices during new installations.
Assign devices to PBX via WMP.
...
Auto-configuration allows you to automatically add and provision Wildix devices during new installations/ devices that had been reset.
Remarks:
...
- Auto-configuration works only in the local network (devices and PBX must be in the same network)
- This feature is available only for Hardware and Virtual PBX
- Wildix devices support this feature starting from the certain fw version, so in case your fw version is not up to date, for the first time it is necessary to add the device manually using a regular auto-provisioning procedure
...