Configuration Guide of Baudisch doorphone (Mod. 33-1486) on Wildix PBX

Proceed as follows:-

1. Go to WMS -> Users and add a new user (in our example, user 166 Baudisch)

Open

2. Copy the SIP Password of this user. There are two ways to do it:

• Click Set passwords, click Generate near SIP/VoIP, then click Show and copy the SIP password:

Open

• Otherwise click Export CSV and copy the SIP password of the newly created doorphone user

The password is needed in Step 3.

Proceed as follows:

• Go to WMS -> Dialplan -> Dialplan rules and create a new Dialplan procedure for the doorphone user (in our example, BaudischDoor)

• Go to WMS -> Users and assign this Dialplan procedure to the doorphone user: double-click on the doorphone user and edit the field Dialplan

Open

• Go back to WMS -> Dialplan, double-click on the newly created Dialplan procedure assigned to the doorphone and proceed with editing it according to the scenario described below

Scenario: when someone presses a button on the doorphone:

• call arrives to Vision (EOL)/ SuperVision (EOL) phone (in our example, SuperVision has extension 1212)

• a video stream from the doorphone is sent to Vision (EOL)/ SuperVision as preview

• a button allowing a Vision (EOL)/ SuperVision (EOL) phone user to open the door is shown on the phone’s interface

Here is an example of the Dialplan configuration: 

Open

1. Custom application -> SIPAddHeader(Camera:http://192.168.133.191/jpg/image.jpg) - when a call from the doorphone arrives to Vision (EOL)/ SuperVision, a video preview is automatically shown on the phone’s display; in our example, the webcam module of the doorphone has IP Address 192.168.133.191

2. Custom application -> SIPAddHeader(Unlock-Button:1234) - user can press the dedicated “unlock” button on the phone’s display to open the door; in fact, by pressing this button Vision (EOL)/ SuperVision (EOL) sends dtmf tones “1234” to door station

3. Dial the phone - at this step you can send a call to specified destination, e.g. you can specify called number in “Set” (otherwise you can use Dialplan application “Call group” to send a call to a call group)

Access the web interface of the doorphone -> Expert configuration -> SIP:

Open

Fill in the following fields:

• SIP registration: Yes

• SIP Server: IP Address of PBX or *.wildixin.com PBX domain name

• SIP domain: same as SIP Server

• SIP User ID: internal number as set in Step 1 (in our example, 166)

• SIP Auth ID: same as SIP User ID

• SIP Auth PIN: SIP Password copied in Step 1

Go to Expert configuration -> Call destinations: 

Open