Document description
Updated:
Permalink:
You can set some provision variables, which change result provision file for device. All changes you have to do in the file /rw2/etc/provision.conf (ini syntax - http://en.wikipedia.org/wiki/INI_file).
You can set parameter for specified device by updating section [wildixp] - WP, [wildixp2] - WP480R2, [wildixfxo] - W04FXO, [wildixgw] - Media5, [wildixair] - WAIR or for all phone devices by updating section [general].
List of supported parameters:
- To set SIP Server Port of the registered account in the device:
SIPServerPort= 0-65535
- To set SIP Server Port of the registered account in the device, located behind NAT
SIPServerPortRemote=0-65535
- To set SIP transport protocol of the registered account in the device
SIPTransport=UDP|TCP|TLS
- To set SIP transport protocol of the registered account in the device, located behind NAT
SIPTransportRemote=UDP|TCP|TLS
- To disable/enable force using HTTP protocol instead HTTPS for all request from the device, like provision, phonebook, features, etc. no
(Note: device should be re-provisioned. Supported only by WP and WP480R2)
HTTPForceUse=yes|no
- disable/enable raw scanning method in case automatic provision (useful feature for PBX inside chroot environment)
(Note: only for general section)
RawScan=enable|disable
set blf transfer type.
Note: only for wildixp section. Supported only by wp480, wp490 and wp600
BLFTransType=attended|blind
- enable/disable making provision authorization for local devices (Note: only for general section)