Page Comparison

<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

Requirements

...

• Edit call file template config located in the file /var/lib/callweaver/dialplan/alarm.template:. 

# Call file template. Supported values (should be in {{}}):
# ID1, ID2 ... - RFPI Addresses, 10 hex digits, in descending signals level order, check it on the web interface of a base, Home/Status page
# SHORTID1, SHORTID2 ... - 2 last digits of IDs
# LEVEL1, LEVEL2 ... - corresponding signal levels, optional
# EXTENSION - extention of alarmed device
# NAME - user name of alarmed device
# TYPE - type of alarm, one decimal digit, check it on the web interface of a base, Alarm page, Idx column
Channel: Local/alarms@alarm-wair
Callerid: "{{NAME}}" <{{EXTENSION}}>
WaitTime: 60
MaxRetries: 3
RetryTime: 30
Context: alarm-wair, specify Dialpan procedure used for managing W-AIR calls here
Extension: {{SHORTID1}}{{TYPE}}
Priority: 1
Setvar: base={{ID1}}

...

• SIP/100&SIP/300 - extension of Calls groups
• 30 - indicates call timeout (in seconds, can be customized)
• ${WAIR_mac_address} - returns the mac address of the Base on which the handset is registered
• ${CALLERID (num)}  - returns the extension number of the caller
• 00000/wair _${WAIR_mac_address} and 00000/call_from_ext _${CALLERID(num)} - indicate paths to recorded audio files. You need to add separate audio files to WMS -> Sounds, one for each W-AIR base station in the Network and each user who sends an emergency call

• Start W-AIR alarms service on the PBX and enable it permanently:

  Code Block
  # systemctl start wairmsg # systemctl enable wairmsg

  
  

...