...
| Info |
|---|
This guide explains how to connect a Baudisch doorphone to a Wildix PBX and set up a video preview and an unlock button on Vision/ SuperVision/ WP600AXX. Updated: May 2017 Permalink: https://confluence.wildix.com/x/1QFKAw |
| Table of Contents |
|---|
Step 1. Create a doorphone user on WMS
Proceed as follows:
- Go to WMS -> Users and add a new user (in our example, user 166 Baudisch)
...
The password is needed in Step 3.
Step 2. Set Dialplan rules
Proceed as follows:
- Go to WMS -> Dialplan -> Dialplan rules and create a new Dialplan procedure for the doorphone user (in our example, BaudischDoor)
- Go to WMS -> Users and assign this Dialplan procedure to the doorphone user: double-click on the doorphone user and edit the field Dialplan
...
3 – at this step you can send a call to specified destination, e.g. you can specify called number in “Set” (otherwise you can use Dialplan application “Call group” to send a call to a call group).
Step 3. Set SIP parameters
Access the web interface of the doorphone -> Expert configuration -> SIP:
...
- SIP registration: Yes
- SIP Server: IP Address of PBX or *.wildixin.com PBX domain name
- SIP domain: same as SIP Server
- SIP User ID: internal number as set in Step 1 (in our example, 166)
- SIP Auth ID: same as SIP User ID
- SIP Auth PIN: SIP Password copied in Step 1
Step 4. Set call destination on door station
Go to Expert configuration -> Call destinations:
...
| Note |
|---|
Note: in our example, 101 is the extension number of Vision; “1234” is the DTMF code to open the door over the integrated relay. |
SW and FW releases
| Note |
|---|
Supported on Vision/ SuperVision/ WP600A. Starting from WMS Version 3.83.34146.02. |
...