| Scroll export button | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| Info |
|---|
The Guide describes and explains how to provision Wildix devices. WMS Version: 5.0X / 6.0X Updated: February October 2024 Permalink: https://wildix.atlassian.net/wiki/x/OxnOAQ |
| Table of Contents |
|---|
Introduction
...
Automatically add Wildix devices during new installations.
Assign devices to PBX via Salesforce Partner Community (for devices, ordered via SFPC)
Assign devices to PBX via WMP (for devices that were ordered via WMP).
Read the chapter dedicated to Provisioning of Devices of WMS Online Guide for more information about provisioning, firmware upgrade, assigning phones, W-AIR network.
...
| Note |
|---|
Note: Starting from WMS 6.03.20230630.3, the logic was updated to avoid HTTP protocol for device provisioning for improved security. With the update to WMS 6.03, devices are switched to HTTPS protocol by default, except for some old devices (e.g. some old FXS/FXO, W01GSM and old WP phones like WP400, WP500). If required, HTTP protocol can be set by the "HTTPForceUse" custom provisioning parameter. Documentation: Provisioning Custom Settings |
Auto-provisioning (Automatic mode) (Hardware, Virtual PBX)
| Anchor | ||||
|---|---|---|---|---|
|
...
| Note |
|---|
Note: For auto-configuration of W01GSM follow this procedure:
|
Provisioning via Salesforce Partner Community
See details in the document Assign Devices to Customer PBX via Salesforce Partner Community.
WMP provisioning
Thanks to this provisioning mode, Wildix Partner can assign devices (W-AIR bases, media gateways, phones) to the customer’s (or to the lead’s) or reseller's customer PBX via the Portal.
...