...
| Info |
|---|
This guide leads you through installation of W-AIR Base Sync Plus and setting up a W-AIR DECT Network in which the bases sync over LAN. W-AIR Base Sync Plus and Sync Plus Outdoor support starts from WMS 5.01. Useful links:
Updated: November 2024 Permalink: https://wildix.atlassian.net/wiki/x/PgjOAQ |
| Table of Contents |
|---|
Watch the video tutorial about setting up a W-AIR Multicell Network (registration is required):
...
| Note |
|---|
Note: The option is available starting from WMS 6.08.20241101.1 |
- Go to WMS -> Devices -> W-AIR devices
- Choose the device you want to unregister and click Delete W-AIR slot:
- The following notification gets displayed:
To apply the changes, go to Devices tab, select the relevant W-AIR base station and click Configure/ Sync device:
Step 4. Assign a W-AIR Handset to a User
You can assign W-AIR handset to a user via the handset itself or via WMS (starting from WMS5.04.20220309.1).
Assigning via the handset
...
| Note |
|---|
Admin password is also accepted. |
Assigning via the WMS
...
Go to to WMS -> Devices -> W-AIR devices
Choose the handset and click Assign to user:
Enter user extension and click Save
...
After you have enabled the option "Sync Plus via Ethernet" (described in the previous chapter, Step 2), you can view the multicell network configuration on the base station's web interface, menu LAN Sync:
...
- Fix parts connected to Aruba HP switch will have expected jitter < 300ns
- Fix parts connected via 3 layer switch will have expected jitter < 500ns
- Fix parts connected via 7 layers switch will have expected jitter < 2000ns
Diagnostics Logging
| Note |
|---|
The option is available starting from firmware v. 0450b13. |
...
Radio Coverage
When checking the Radio Coverage on the web interface of the Base station -> menu Multi Cell, pay attention that the coverage values of every connected base in DECT sync source column are infinite by design.
...
All the Call Features can be set up in WMS or Wildix Collaborations in User SettingsCollaboration -> User Settings or via Collaboration 7/ x-bees -> Settings -> Calls, or otherwise, directly from the handset, by dialing the Feature Codes of the system.
...
Upgrade Procedure of W-AIR system
| Note |
|---|
W-AIR Upgrade logic in WMS 5.03. Starting from WMS version 5.03.20210709.3, W-AIR System is upgraded according to the following policies:
|
...