Html |
---|
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script> |
Html |
---|
<div class="fb-like" data-href="https://confluence.wildix.com/x/KQg8AQ" data-layout="button_count" data-action="recommend" data-size="large" data-show-faces="true" data-share="true"></div> |
...
Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
In this Admin Guide you can find provisioning variables the list of custom parameters which can help you to change provisioning settings of Wildix devices. Updated: March 20182024 Permalink: https://confluencewildix.wildixatlassian.comnet/wiki/x/KQg8AQXB3OAQ |
When provisioning Wildix devices, you can set custom parameters to change different settings in the provisioning file.
All the changes must be done in the file /rw2/etc/provision.conf (ini syntax - http://en.wikipedia.org/wiki/INI_file).
Access the file via SSH as root using the command:
Code Block |
---|
nano-tiny /rw2/etc/provision.conf |
The parameters can be set for a specified device by adding them to one of these sections:
- [wildixp] - old WP models
- [wildixp2] - WP480R2WP4X0R2, WP4X0R3, START (ex WP410), WelcomeConsole, WorkForce
- [wildixp5] - Start 5, WorkForce 5, ForcePro 5, WelcomeConsole 5
- [wildixfxo] - W04FXO
- [wildixfxo3] - W04FXO 2020 (R3)
- [wildixfxs2] - FXS
- [wildixgw] - Media Gateways
- [wildixair] - W-AIR
Otherwise, you can apply the parameters to all the registered devices by adding them to [general] section.
Note |
---|
Limitations:
|
List of supported parameters:
Parameters | Values | Description |
---|
AuthLockTimeout | =>=0 |
SIPServerPortRemote
=0-65535
SIPTransport
=UDP|TCP|TLS
set SIP transport protocol of the device registered to the account
SIPTransportRemote
=UDP|TCP|TLS
only for [general] section. The parameter allows setting the desired timeout for storing PIN for Voicemail menu on WP phone (example: AuthLockTimeout=300). By default, the value is 30 seconds. Once the timeout is reached, a user needs to re-enter the PIN code. Note: the parameter is available starting from WMS 5.03. | ||
BaseMaxSIPReg | =4-30 | only for [wildixair] section. Prior to 5.04, the default value is 20 accounts per 1 base. Starting from 5.04, the distribution is as follows:
Edit it in case you need to change the number of SIP accounts before distributed load per base station (min. value = 4, max. value = 30). |
BLFNotifyType | =ActiveCall|ActiveAndIncomingCall | only for [wildixp2] section. The default value is "ActiveCall". Set "ActiveAndIncomingCall" value to make BLF keys blink when a monitored user has active call+incoming call. |
BLFTransType | =attended|blind | only for [wildixp] section. Set BLF transfer type. Supported only by WP480, WP490, WorkForce, WelcomeConsole. |
DelayAfterOffhook | =1-255 | only for [wildixfxo3] section. The parameter allows controlling the duration of the delay before answering an outbound call on W04FXO r3. Note: the parameter is available starting from WMS 5.04. |
DisableCodecG729 | =yes|no | only for [wildixair] section. Disable g729 codecs ("yes" - disable, "no" - enable). The parameter is applied only to W-AIR Small Business Bases. Note: Starting from WMS 6.02.20230306.1, the parameter is no longer available and removed from the system. |
DisableShowUsername | =yes|no | only for [wildixp2] and [wildixp5] sections. The parameter is disabled by default (yes - enable, no - disable). Enable it in case you need to show only internal numbers (extensions) (old behavior). |
EnableMWISubscribe | =yes|no | only for [wildixfxs2] section. Enable subscription for MWI (Message Waiting Indicator, shows voicemail LED notifications). The parameter is disabled by default. Supported only by W24FXS 2015. |
EnableReasonCause | =yes|no | only for [wildixp2] and [wildixp5] sections and WP480/ 490 r3 phones (2017), WorkForce, WelcomeConsole and WP 5 phones. The parameter is enabled by default (yes - enable, no - disable). It disables/ enables displaying detailed hangup reasons. |
FailoverPbxIp | =<IP address> | only for [wildixp2] section. Force the switch from Main PBX to Failover PBX (SIP Server 2). Use only IP address. |
g711only | =yes|no | only for [wildixair] section. Set only g711 codecs ("yes" - enable, "no" - disable). The parameter is applied only to W-AIR Bases. Note: Starting from WMS 6.02.20230306.1, the parameter is no longer available and removed from the system. |
HIDE_DTMF | =yes|no | hide/ show DTMF dialpad on the phones' displays ("no" - show, "yes" - hide). |
HTTPForceUse | =yes|no | disable/ enable force HTTP protocol instead HTTPS for all requests from the device, like provision, phonebook, features, etc. |
After the parameter is |
applied, a device should be re-provisioned |
RawScan
=enable|disable
BLFTransType
=attended|blind
only for [wildixp] section. Set BLF transfer type. Supported only by WP480, WP490 and WPp600
(the parameter is not applicable to GSM media gateways of old generation) | ||
LLDP | =yes|no | only for [wildixp2] and [wildixp5] sections and only for WP480/ 490 r3, WorkForce, WelcomeConsole. The parameter is disabled by default (yes - enable, no - disable). It allows Wildix devices to advertise information to their directly connected peers when enabled through nano-tiny /rw2/etc/provision.conf. Note: the parameter is available starting from WMS 5.03. |
LLDPInterval | =10-3600 | only for [wildixp2] and [wildixp5] sections and only for WP480/ 490 r3, WorkForce, WelcomeConsole. The default interval is 30. It allows setting LLDP interval. Note: the parameter is available starting from WMS 5.03. |
LossPktRateMax | =0-100 | set the parameter to control Packet Loss. "1-99" - Critical Network Problem Threshold, "100" - disable. Supported only by WP4x0, WelcomeConsole. After the parameter is applied, the device should be re-provisioned. |
LossPktRateMin | =0-100 | set the parameter to control Packet Loss. "1-99" - Network Problem Threshold, "100" - disable. Supported only by WP4x0, WelcomeConsole. After the parameter is applied, the device should be re-provisioned. |
MelodyBLF | =yes|no | only |
for [ |
wildixp2] |
section. Supported by Start, WP480/ 490 r3, WorkForce, WelcomeConsole. The parameter is disabled by default ("yes" - enable, "no" - disable). It enables a ringtone to be played instead of a beep for WP BLFs if audio notification is enabled. | ||
OffHookDialOut | =yes|no | only for [wildixp2] and [ |
wildixp5]sections and WP480/ 490 r3 phones (2017), WorkForce, WelcomeConsole and WP 5 phones. The parameter is enabled by default ("yes" - enable, "no" - disable). It disables/ enables auto call generation on a handset pickup when pressing “History”, “Phonebook”, “Redial” keys. | ||
POWER_LED | =yes|no | only for [wildixp2] section. This parameter allows disabling the missed call LED on WP4X0 2015 phones, WorkForce, WelcomeConsole (this setting is normally applied in Hotels). Enable/ disable WP 2015 Power LED ("no" - disable, "yes" - enable); you can also change the behavior of the power LED by using the parameter PowerLEDBlinkTime (described below). |
PowerLEDBlinkTime | =0-14400 | only for [wildixp2] section. This parameter allows changing the behavior of missed call LED on WP4X0 2015 phones, WorkForce, WelcomeConsole. Set the time in seconds during which the LED of a missed event (call or voice mail) will blink. |
Value "0" |
means blink always, |
"1" - blink only |
once. | ||
RawScan | =enable|disable | only for [general] section. Disable/ enable raw scanning method in case of automatic provision of devices (the parameter is useful for PBXs inside chroot environment). |
ResetHandset | =yes|no |
XMLBrowserAuth
=yes|no
g711only
=yes|no
ResetHandset
=yes|no
only for [wildixair] section. The parameter is disabled by default ("yes" - enable, "no" - disable). Enable it in case you need to delete a Handset IPEI from W-AIR SB and allow to reuse the slot. When it is done, you need to disable it. | ||
RXgain | =-10-10 | only for [wildixfxs2] section. The parameter allows modifying the RX gain level on FXS r3 media gateways. The default value is -2 dB. Note: the support starts from WMS 6.01. |
SidetoneHandset | =0-7 | only for [wildixp2] and [wildixp5] sections and WP480/ 490 r3 phones (2017), WorkForce, WelcomeConsole and WP 5 phones. The parameter is disabled by default. It enables handset sidetone feature (sidetone is the sound of your own voice that you hear from handset or headset when making a call) (disabled = 0, min. level = 1, max. level = 7). |
SidetoneHeadset | =0-7 | only for [wildixp2] section and WP480/ 490 r3 phones (2017), WorkForce, WelcomeConsole. The parameter is disabled by default. It enables headset sidetone feature (disabled = 0, min. level = 1, max. level = 7). |
SIPServerPort | =0-65535 | set SIP Server Port of the device registered to the account. |
SIPServerPortRemote | =0-65535 | set SIP Server Port of the device behind NAT registered to the account. |
SIPTransport | =UDP|TCP|TLS | set SIP transport protocol of the device registered to the account. |
SIPTransportRemote | =UDP|TCP|TLS | set SIP transport protocol of the registered account in the device, located behind NAT. |
SNMP | {"enabled":"yes|no", port:"<1024-65535>", "trusted_ip":"<IPv4 address>"} | only for [wildixp2] section and WP480R3, WorkForce, WelcomeConsole. The parameter is disabled by default. |
DisableCodecG729
=yes|no
only for [wildixair] section. Disable g729 codecs ("yes" - disable, "no" - enable). The parameter is applied only to W-AIR Small Business Bases
LossPktRateMin
=0-100
LossPktRateMax
=0-100
BLFNotifyType
=ActiveCall|ActiveAndIncomingCall
BLF will blinks in case when monitored user has active call+incoming call if "ActiveAndIncomingCall" or keep the old behavior if "ActiveCall"
FailoverPbxIp
=<IP address>
Note |
---|
Limitations: You have to add empty section for loading parameters from [general] section. For example you added parameter HTTPForceUse = yes to general section. You have to add empty section wildixp2 if you want to apply this parameter for WPR2 devices. WP2015 does not apply the parameter POWER_LED and PowerLEDBlinkTime without rebooting the device. |
...
It enables SNMP monitoring. Examples of a valid SNMP parameter: SNMP={"enabled":"yes", "port":"4444", "trusted_ip":"192.168.0.100"} or SNMP={"enabled":"yes"}. Notes:
| ||
SpeakerDisable | =yes|no|<list of extensions> | only for [wildixp2] section. The parameter allows disabling speaker mode on WorkForce. By default, the speaker mode is on ("yes" - disable the speaker mode for all WorkForce devices, "no" - enable it,<list of extensions> (e.g. SpeakerDisable=380,240,220) - disable the speaker mode for the mentioned extensions only). Note: the parameter is available starting from WMS 5.04. |
SRTPForceUse | =yes|no | only for [wildixgw], [wildixfxo3] and [wildixfxs2] sections. The parameter is enabled by default for [wildixgw] starting from WMS version 5.01 and for [wildixfxo3] and [wildixfxs2] sections - starting from WMS version 5.03 ("no" - disable, "yes" - enable). It enables Direct SDES-SRTP support between BRI/ PRI media gateways (EOL). |
ToneDetectByPeer | =yes|no | only for [wildixfxs2] section. When enabled, the parameter fixes an issue of slow fax reception speed which sometimes occurs in US/ Canada on FXSR3 devices. By default, the parameter is disabled. Note: the support starts from WMS 5.04. |
TrustLocalDevice | =yes|no | only for [general] section. Enable/ disable an automatic adding of local devices to the provisioning database (for 2 hours) (Note: for W-AIR you have create network manually via WMS interface). |
TXgain | =-10-10 | only for [wildixfxs2] section. The parameter allows modifying the TX gain level on FXS r3 media gateways. The default value is 0 dB. Note: the support starts from WMS 6.01. |
WairMulticastSync | =yes|no | only for [wildixair] section on a HW/ VM PBX. When enabled and Primary Base IP parameter is not set in WMS -> Devices -> W-AIR Networks, Multicast data sync is used instead of Peer to Peer (the setting on a base station's web interface). Note: the support starts from WMS 6.04.20230815.1. |
w-air-sb-pin | =0000-9999 | only for [wildixair] section. The parameter allows changing the default PIN code for W-AIR SB. |
WairSilentcharging | =on|off|deactivated | only for [wildixair] section. The parameter allows controlling silent charging setting for x-hoppers headsets. Value "on" implies that only LED indication is used while charging; "off" suggests normal mode with LED indication and audio while charging; "deactivated" means headset is disconnected and can’t receive calls while charging. Note: the support starts from WMS 6.01.20221122.1. |
WebLoginActive | =yes|no | only for [wildixp2] section. The parameter allows to disable Web GUI on WorkForce and WelcomeConsole phones after provisioning. By default, Web GUI is enabled. Note: the support starts from WMS Beta 6.04.20231012.1, WorkForce firmware v. 65.145.6.43, WelcomeConsole firmware v. 68.145.2.72. |
WideNarrowbandUse | =yes|no | only for [general] section. The parameter allows managing wideband codecs usage. By default, the parameter is disabled and wideband codecs are forced for all devices. When the parameter is enabled (WideNarrowbandUse=yes), the previous behaviour remains: all devices use wideband codec priority or narrowband codec priority and remote codecs priority or local codecs. Notes: In case of WideNarrowbandUse=yes, you need to add relevant lines to etc/callweaver/sip-wideband.conf to set the parameters (see more in Custom config parameters List - Manage wideband codecs usage) Note: the parameter is available starting from WMS 5.04. |
Macrosuite divider macro | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Button macro | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|