Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
The List of custom config parameters that allow changing various settings in config files. Created: August 2018 Updated: July 2022 Permalink: https://wildix.atlassian.net/wiki/x/Fh3OAQ |
Table of Contents |
---|
To make any changes to config files, access them via SSH as root:
...
The option allows overriding of Global Call groups settings (see the chapter below) and saving custom parameters after each system upgrade.
...
Note |
---|
|
Collaboration
Disable file transfer in Collaboration chat messages
...
Change the default Departments tree separator Anchordepartmentsastree departmentsastree
departmentsastree | |
departmentsastree |
Starting from WMS 5.04.20220309.1, the Colleagues tab in Collaboration shows only the list of Departments and there is possibility to create a multilevel hierarchy of Departments and display them in a tree view.
...
Note |
---|
The support starts from WMS 5.04.20220309.1 |
By default, only people added to rosterare shown on the Colleagues tab. To display all users registered on the PBX, add the following line to the /rw2/etc/env.custom.ini file:
...
The option allows setting a specific GSM gateway for SMS sending for each separate user:
Edit the config file /etc/wildix/smsd-route.conf by specifying user extension and MAC address of GSM gateway, for example:
Code Block 101,9c7533014b00 102,9c7533014b00 103,9c7533014b00 104,9c7533014b01
...
Note |
---|
Note: Starting from WMS 5.04.20220309.1, in case you have several streams, modify the parameter [radio] to [radio1], [radio2], etc. in the config file and choose the corresponding option ("radio1", "radio2") when setting music on hold in the Dialplan. |
...
Create a new config file template.conf including GTM ID in the file /rw2/etc/pbx/, for example, use the command:
Code Block echo 'gtm=GTM-12345678' > template.conf
where 123445678 is Google Tag Manager ID.
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
ECM is enabled by default. To disable it, add the following line in /etc/callweaver/res_fax_custom.conf:
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
Maximum transmission speed
...
Add the below line to /etc/kamailio/cfg.d/host_specific_custom.cfg file:
Code Block modparam("pv", "varset", "allow_users_and_trunks_behind_same_nat=i:1")
Available values: 1 - enabled; 0 - disabled.
Run the command:
Code Block systemctl restart kamailio.service
...