Info |
---|
Update repository: rel40vitrociset |
WMS Version 4.03.45341.50 Date:
...
29.
...
01.
...
2021
Improvement
[WMS-10227] - sys: fixed an issue when identities_routing procedure couldn't be used in Failover scenario
Fixes
[WMS-8220] - wms: fixed an issue with analog ports being ordered incorrectly in WMS -> Devices
[WMS-10033] - sys: fixed an issue with incorrect display of presence statuses for monitored users on WelcomeConsole with a large amount of configured BLF keys (> 50)
[WMS-10155] - sys: fixed an issue with incorrect display of presence statuses for monitored users on WelcomeConsole with a large amount of configured BLF keys (> 50) in WMS Network
[WMS-10180] - col: fixed an issue in which Collaboration app didn't switch to Failover PBX after Primary PBX was powered off
[WMS-10192] - sys: fixed an issue with call forwarding of external calls being routed through default_route number in Failover mode
[WMS-10292] - col: fixed an issue with Collaboration reconnecting in the loop after starting a laptop/ PC
WMS Version 4.03.45312.39 Date: 12.11.2020
New Feature
[WMS-9418] - sys: added custom parameter to limit the number of users registrations accepted by SIP Proxy
...
[WMS-9989] - sys: fixed an issue when a call placed using "Identities" feature failed if a callee set call forwarding to a Call group
Wildix Firmware Package 2.0.50096 Date: 4.08.2020
New Firmware
New firmware for WP480G r3 v. 63.145.10.21, WP490G r3 v. 67.145.8.93, WorkForce v. 65.145.2.10, WelcomeConsole v. 68.145.2.25dev: added support for led indication of presence and call status on whs duoled and monoled headsets connected to workforce
...
WMS Version 4.03.45282.28 Date: 20.07.2020
Improvements
[WMS-8294] - sys: decreased call origination delay on devices connected via Failover PBX
...
[WMS-9314] - dev: fixed an issue in which WorkForce failed to get DNS settings if Secondary DNS server was set via DHCP
WMS Version 4.03.45247.21 Date: 28.05.2020
New Feature
[WMS-8891] - sys: added possibility to enable the following features in Failover mode:
- Continuity
- Pre-answer services
- Email notifications and user features
Improvement
[WMS-8510] - sys: added Failover PBX IP to Firewall whitelist of PRI/ BRI media gateways
...
WMS Version 4.03.45209.17 Date: 13.05.2020
Improvement
[WMS-8743] - col: added support for filtering by Department in CDR-View
...
[WMS-8929] - dev: performance and stability improvements for WorkForce phones
WMS Version 4.03.45109.12 Date: 25.03.2020
Improvements
[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network
...
- new option "Decimal places number in Cost" is available in CDR-View -> Settings and allows changing the number of decimal places to be shown.
[WMS-8245] - sys: Identities feature is now compatible with ACl rule "Can/cannot - call pickup"
[WMS-8275] - sys: Reverse proxy improvement:
...
- Fixed an issue when missed calls to identity numbers were not displayed in caller's history on WP
- A real caller's number is now not displayed during calls to a Call group that contains agents with identity numbers
- It is now possible to forward a call to identity number. For this purpose:
- create a separate Dialplan procedure "identities_routing"
- set the identity number as a called number in Dialplan
- use "Set" application to set the variable __TO_IDENTITY: Set ->__TO_IDENTITY →${EXTEN}
- use "Dial the phone" application to dial the real user number
- make sure "identities_routing" is added to Included procedures of Dialplan for managing incoming calls
Fixes
[WMS-7400] - wms: fixed an issue with logout on WP4X0 being not performed after it was assigned to "Unknown" account
...