| Info |
|---|
Update repository: rel40vitrociset |
WMS Version 4.03.45109.12
Improvements
[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network
[WMS-8061] - sys: enabled by default audio notification during call intrusion
A beep sound is played when call intrusion is started.
To disable it:
- for all the system: go to WMS Dialplan -> General Settings -> Set dialplan variables -> add INTRUSION_NOTIFICATION=no
- for a specific group of users: modify Dialplan procedure used for the group -> add Set application and insert INTRUSION_NOTIFICATION=no
[WMS-8283] - wms: optimized API response time for all endpoints with basic and session authentication
[WMS-8416] - sys: improved the logic of call forwarding to trunks
- renamed the ACL "Trunk to trunk forward" to "Forward to trunk"
- changed the behaviour: now the ACL blocks all call forwards to trunk received from trunk/ user extension
Fixes
[WMS-8072] - sys: fixed one way audio issue in case a call wasn't answered from WP phone and than routed and answered by a Call group member
[WMS-8432] - sys: fixed no audio issue after enabling video during a call through WMS Network in some rare cases
[WMS-8446] - wms: optimized the option to configure/ sync device (WMS -> Devices) for systems with large amount of devices
[WMS-8565] - sys: fixed an issue in which configuration sync between Main and Secondary PBXs could not work in some cases
New Firmware
New firmware for WP480GR3 v. 63.145.10.13, WP490GR3 v. 67.145.8.92, WelcomeConsole v. 68.145.2.24
[WMS-6918] - dev: fixed an issue with delay of handling calls on WP480GR3, WP490GR3, WelcomeConsole in Failover environment if Secondary PBX was down
WMS Version 4.03.45075.08
...
Improvements
[WMS-7773] - sys: added support for showing up to 0,0001 in cost calculation in pricelist and CDR-View
- new option "Decimal places number in Cost" is available in CDR-View -> Settings and allows changing the number of decimal places to be shown.
[WMS-8245] - sys: Identities feature is now compatible with ACl rule "Can/cannot - call pickup"
[WMS-8275] - sys: Reverse proxy improvement:
...
[WMS-8375] - sys: improved system performance for systems with large amount of users (> 3000 users)
Fixes
[WMS-7892] - sys: fixed a random no audio issue after enabling video during a call between two Collaborations
[WMS-8280] - sys: fixed an issue in which Presence server sent the same list of devices every minute if a user had more than 1 offline device
New Firmware
New firmware for WP480GR3 v. 63.145.10.12.rom, WP490GR3 v. 67.145.8.91, WelcomeConsole v. 68.145.2.23
...
Current limitation: no LED indication for BLF keys located on WelcomeConsole-EXT or the second page of WP480 r3 and WelcomeConsole
Fixes
[WMS-7892] - sys: fixed a random no audio issue after enabling video during a call between two Collaborations
[WMS-8280] - sys: fixed an issue in which Presence server sent the same list of devices every minute if a user had more than 1 offline device
WMS Version 4.03.45030.07
...
[WMS-7816] - wms: added support for W04FXO R3 Media Gateway on WMS interface
Improvements
[WMS-7652] - wms: added back the option to assign unprovisioned devices that were added via WMP to users
...
- Fixed an issue when missed calls to identity numbers were not displayed in caller's history on WP
- A real caller's number is now not displayed during calls to a Call group that contains agents with identity numbers
- It is now possible to forward a call to identity number. For this purpose:
- create a separate Dialplan procedure "identities_routing"
- set the identity number as a called number in Dialplan
- use "Set" application to set the variable __TO_IDENTITY: Set ->__TO_IDENTITY →${EXTEN}
- use "Dial the phone" application to dial the real user number
- make sure "identities_routing" is added to Included procedures of Dialplan for managing incoming calls
Fixes
[WMS-7400] - wms: fixed an issue with logout on WP4X0 being not performed after it was assigned to "Unknown" account
...