Page Comparison

WMS Version 4.03.45209.17 Date: 13.05.2020

Improvement

[WMS-8743] - col: added support for filtering by Department in CDR-View

If Department is specified in user's settings in WMS, it is displayed as Group value. Note: This field is updated once every 24 hours after CDR-View launch.

[WMS-8800] - col: fixed an issue when it was impossible to apply filters and search for colleagues in CDR-View

Fixes

[WMS-8676] - sys: fixed an issue in which WebAPI Wallboard stopped returning Call agents data after WMS Beta v. 4.03.45121.12

[WMS-8689] - wms: fixed an issue when a user with admin rights could still access Remote support menu in WMS even if it was restricted by ACL rule

[WMS-8839] - sys: fixed call drop issue after 25 minutes if it was placed between 2 Collaborations in WMS Network

[WMS-8840] - sys: fixed one way audio issue in case of mobility call if Direct RTP was enabled

[WMS-8844] - sys: SDES-SRTP optimization

[WMS-8862] - col: fixed an issue in which Filter Period by "Interval" in CDR-View didn't work

New Firmware

New firmware for WorkForce v. 65.145.0.172

[WMS-8929] - dev: performance and stability improvements for WorkForce phones

WMS Version 4.03.45109.12 Date: 25.03.2020

Improvements

[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network

...

• renamed the ACL "Trunk to trunk forward" to "Forward to trunk"
• changed the behaviour: now the ACL blocks all call forwards to trunk received from trunk/ user extension

Fixes

[WMS-8072] - sys: fixed one way audio issue in case a call wasn't answered from WP phone and than routed and answered by a Call group member

...

[WMS-8565] - sys: fixed an issue in which configuration sync between Main and Secondary PBXs could not work in some cases

New Firmware

New firmware for WP480GR3 v. 63.145.10.13, WP490GR3 v. 67.145.8.92,  WelcomeConsole v. 68.145.2.24

...

• new option "Decimal places number in Cost" is available in CDR-View -> Settings and allows changing the number of decimal places to be shown.

[WMS-8245] - sys: Identities feature is now compatible with ACl rule "Can/cannot - call pickup" 

[WMS-8275] - sys: Reverse proxy improvement:

...

[WMS-8375] - sys: improved system performance for systems with large amount of users (> 3000 users)

Fixes

[WMS-7892] - sys: fixed a random no audio issue after enabling video during a call between two Collaborations

[WMS-8280] - sys: fixed an issue in which Presence server sent the same list of devices every minute if a user had more than 1 offline device

New Firmware

New firmware for WP480GR3 v. 63.145.10.12.rom, WP490GR3 v. 67.145.8.91, WelcomeConsole v. 68.145.2.23

...

• Fixed an issue when missed calls to identity numbers were not displayed in caller's history on WP
• A real caller's number is now not displayed during calls to a Call group that contains agents with identity numbers
• It is now possible to forward a call to identity number. For this purpose:
  
  • create a separate Dialplan procedure "identities_routing"
  • set the identity number as a called number in Dialplan
  • use "Set" application to set the variable __TO_IDENTITY: Set  ->__TO_IDENTITY →${EXTEN}
  • use "Dial the phone" application to dial the real user number
  • make sure "identities_routing" is added to Included procedures of Dialplan for managing incoming calls

Fixes

[WMS-7400] - wms: fixed an issue with logout on WP4X0 being not performed after it was assigned to "Unknown" account

...