...
Info |
---|
This User Guide explains how to use Vision and Wildix Phone App. End user brochures are available at this link: Wildix VoIP Phones - End User Brochures Datasheets: VoIP Phones Datasheet - WP4X0, WelcomeConsole, Vision, SuperVision, Accessories HW Version: 48.145.12.123110 Android app Version: 5.1.1 WMS Version: 3.88/ 4.01 Created: June 2018 Updated: April August 2019 Permalink: https://confluence.wildix.com/x/CAKIAQ |
...
Warning |
---|
Current limitations:
Vision Changelog: https://www.wildix.com/new-releases-and-updates/vision-changelog/ |
...
- Go to Vision Settings -> Wireless & networks
- Select the network:
- Ethernet
- Wi-Fi
Ethernet
- Ethernet -> enable the option
- IP address: the phone automatically receives the IP address from the DHCP Server
...
- Colleague
- Monitor status (ringing/in call; dnd/away)
- Call (tap the element and select Call)
- Call pickup (no possibility to check who is calling and audio notification, tap the element while the status is “ringing” and select Pickup)
- Transfer a call (tap the element and select Transfer during a call)
- Speed Dial
Call number configured as speed dial
Note Note: you can use any shortcut based on Feature codes with Speed Dial function key, example: enter the value “cgmanager*2*[call_group_ID]” into the field for dynamic call group login / logout.
- Trunk
- Monitor status for BRI/FXO/GSM (green/red)
- Call through this trunk (if green)
- Timetable
- Monitor status (green/yellow/red)
- Change status (tap the element and select Call)
- Switch
- Monitor status (green/red)
- Change status (tap the element and select Call)
- 3 state switch
- monitor status (green/yellow/red)
- change status (tap the element and select Call)
- Group Pick up
- Pickup a ringing call of user belonging to your ACL group on the same PBX
- Call group
- Monitor status (red=incoming call; green=idle)
- Call a call group (tap the element and select Call)
- Pickup a ringing call (no possibility to check who is calling and audio notification, tap the element and select Pickup if red)
- Send DTMF
...
- Update source: allows installing “preview” versions (changelog and upgrade instructions: Wildix website)
Check for Updates: tap to search for new versions; in case the new version is available, follow the instructions on the screen to upgrade
Note Note: The possibility to deploy a local upgrade server for Vision starting from version 2.9.95 and WMS 4.01
In cases when the phone cannot get firmware from firmwares.wildix.com server (for example, connection to the server is blocked from the phone; PBX doesn't have access to the server), you can deploy a local upgrade server and indicate it in WMS Settings-> Tools and utilities -> Upgrade -> Custom firmware server. Please contact Wildix Support for details.
- Ringtone: select the ringtone playback mode in case headset is connected: Headset / Speaker / Headset+Speaker (ringtone is played one time to headset and then to speaker)
Initiate video calls (On / Off): when On, video is automatically started upon starting an audio call
Note Note: Starting from WMS 3.85.35510, you can receive video from doorphones, even when the option is disabled.
- Audible DTMF (On / Off)
- Automatic upgrades (On / Off); when Off, an additional option Notify of new versions – On/Off is displayed
Allow usage of other VoIP Apps (On / Off): when On, Phone app does not open automatically during an incoming call
Note Note: We recommend to enable this option for ubiconf Videoconference.
- EU volume limit (On/ Off): enable/ disable the volume limit
- Show chat notification (On/Off): enable / disable visual new chat message notifications
- Mute notifications during calls (On/Off, enabled by default): disable/ enable sound notifications from third-party apps during a call
- Number of BLF keys:
- 4 keys per page (supported in case 12 or less keys are configured: 3 pages x 4 keys)
- 18 keys per page (supported in case 54 or less keys are configured: 3 pages x 18 keys)
- 40 keys per page (default: 3 pages x 40 keys)
- Preferred video size: the default size is VGA, you can switch to QVGA, 720p
- Integration URL: insert a web application link to allow opening it inside the App
- Default tab: configure to which page application is moved after an idle timeout specified in Timeout (seconds). The default page is Function keys. You can change it to Dialpad, Function keys, Integration URL or disable at all
- Timeout (seconds): adjust the timeout after which Default tab is automatically opened. The default timeout is 120 sec
...
Appendix 5. Sync of contacts
To be able to access your Wildix PBX corporate phonebooks from Vision, you need to set up CardDAV sync: CardDAV Sync of Contacts.
Html |
---|
<div class="fb-like" data-href="https://confluence.wildix.com/x/CAKIAQ" data-layout="button_count" data-action="recommend" data-size="large" data-show-faces="true" data-share="true"></div> |
...