Page Comparison

<div id="fb-root"></div>
<script>(function(d, s, id) {
  var js, fjs = d.getElementsByTagName(s)[0];
  if (d.getElementById(id)) return;
  js = d.createElement(s); js.id = id;
  js.src = 'https://connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.11';
  fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>

...

Users

2 PBXs in WMS Network, each with its own Active Directory for users

...

1. Make import of users via Active Directory on Server PBX
2. Access Client PBX and move users from Server PBX to Client PBX
3. Enable Active Directory sync on Client PBX: connect as root via SSH to Client PBX and create the file /rw2/etc/ad_connect.conf
4. Copy the contents of the file ad_connect.conf from Server PBX to Client PBX

Result: Single Sign-On for Active Directory works for users on Client PBX.

...

The feature is enabled by default starting from WMS version 4.01.44251.31. To disable it:

• Edit the file /etc/callweaver/sip-general-custom.conf by adding the following lines: 

...

callweaver -rx "sip reload" 

Enable Direct SDES-SRTP

...

 

Anchor
sdessrtp sdessrtp

...

modparam("pv", "varset", "device_caps_sdes_srtp=s:(Wildix WP4[8|9]0GR[3|4])|(Wildix .*BRI)|(Wildix Wildix W0[1-2]PRI)")
modparam("pv", "varset", "sdes_srtp=i:1")

*restart SIP proxy via console (/etc/init.d/kamailio restart)

• (only for BRI/ PRI mgw) Add a custom provisioning parameter SRTPForceUse=yes to [wildixgw] section of the file /rw2/etc/provision.conf

• Send the new configuration to devices via Configure / Sync device option in WMS -> Devices

Select a specific GSM gateway 

The option allows selecting a specific GSM gateway for SMS sending for each separate user (available starting from WMS v. 4.03.44914.04)

• Access smsd-route.conf file via SSH as root: 

  Code Block
  nano-tiny /etc/wildix/smsd-route.conf

  
  

• Specify user extension and MAC address of GSM gateway, for example 

  Code Block
  01,9c7533014b00, 102,9c7533014b01

  
  

Trunks

Enable Q-value (serial forking) for trunk registration

...

With persistentmembers enabled, all dynamically added Call group members (via Feature code "Call group management" 97, WebAPI "Call group login" and Contact center feature in Collaboration) are stored in their Call groups and therefore saved after the system restart. 

• autofill = no 

With autofill disabled, a Call group attempts to deliver calls to members in a serial manner. This means only one call is attempted to be distributed to members at a time. Additional callers are not distributed to members until that caller is connected to a member. With autofill enabled, callers are distributed to available agents simultaneously. The parameter allows you to more efficiently distribute calls between Call group members, especially if there are several callers in a queue and several members can accept a call. 

Integrations

Hotel PMS

WHoteld package supports some custom configuration parameters that can be changed by editing the file /etc/wildix/whoteld_manager_custom.conf.

...