...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
| Info |
|---|
Update repository: rel40vitrociset |
Wildix Firmware Package 2.0.50096 Date: 4.08.2020
New Firmware
New firmware for WP480G r3 v. 63.145.10.21, WP490G r3 v. 67.145.8.93, WorkForce v. 65.145.2.10, WelcomeConsole v. 68.145.2.25dev: added support for led indication of presence and call status on whs duoled and monoled headsets connected to workforce
[WMS-9419] - dev: fixed an issue in which incoming concurrent calls were routed only to BLF key "Line 1"
WMS Version 4.03.45282.28 Date: 20.07.2020
Improvements
[WMS-8294] - sys: decreased call origination delay on devices connected via Failover PBX
...
[WMS-9138] - sys: fixed an issue with wrong billing calculation for calls through WMS Network
New Firmware
New firmware for WorkForce v. 65.145.2.6
...
[WMS-9314] - dev: fixed an issue in which WorkForce failed to get DNS settings if Secondary DNS server was set via DHCP
WMS Version 4.03.45247.21 Date: 28.05.2020
New Feature
[WMS-8891] - sys: added possibility to enable the following features in Failover mode:
- Continuity
- Pre-answer services
- Email notifications and user features
Improvement
[WMS-8510] - sys: added Failover PBX IP to Firewall whitelist of PRI/ BRI media gateways
...
WMS Version 4.03.45209.17 Date: 13.05.2020
Improvement
[WMS-8743] - col: added support for filtering by Department in CDR-View
...
[WMS-8862] - col: fixed an issue in which Filter Period by "Interval" in CDR-View didn't work
New Firmware
New firmware for WorkForce v. 65.145.0.172
[WMS-8929] - dev: performance and stability improvements for WorkForce phones
WMS Version 4.03.45109.12 Date: 25.03.2020
Improvements
[WMS-7772] - sys: added support for up to 1000 nodes in WMS Network
...
[WMS-8565] - sys: fixed an issue in which configuration sync between Main and Secondary PBXs could not work in some cases
New Firmware
New firmware for WP480GR3 v. 63.145.10.13, WP490GR3 v. 67.145.8.92, WelcomeConsole v. 68.145.2.24
...
- new option "Decimal places number in Cost" is available in CDR-View -> Settings and allows changing the number of decimal places to be shown.
[WMS-8245] - sys: Identities feature is now compatible with ACl rule "Can/cannot - call pickup"
[WMS-8275] - sys: Reverse proxy improvement:
...
[WMS-8280] - sys: fixed an issue in which Presence server sent the same list of devices every minute if a user had more than 1 offline device
New Firmware
New firmware for WP480GR3 v. 63.145.10.12.rom, WP490GR3 v. 67.145.8.91, WelcomeConsole v. 68.145.2.23
...
- Fixed an issue when missed calls to identity numbers were not displayed in caller's history on WP
- A real caller's number is now not displayed during calls to a Call group that contains agents with identity numbers
- It is now possible to forward a call to identity number. For this purpose:
- create a separate Dialplan procedure "identities_routing"
- set the identity number as a called number in Dialplan
- use "Set" application to set the variable __TO_IDENTITY: Set ->__TO_IDENTITY →${EXTEN}
- use "Dial the phone" application to dial the real user number
- make sure "identities_routing" is added to Included procedures of Dialplan for managing incoming calls
Fixes
[WMS-7400] - wms: fixed an issue with logout on WP4X0 being not performed after it was assigned to "Unknown" account
...