Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
The List of custom config parameters that allow changing various settings in config files. Created: August 2018 Updated: July September 2023 Permalink: https://wildix.atlassian.net/wiki/x/Fh3OAQ |
Table of Contents |
---|
To make any changes to config files, access them via SSH as root:
...
Note |
---|
|
Collaboration
Disable file transfer in Collaboration chat messages
...
Change the default Departments tree separator Anchordepartmentsastree departmentsastree
departmentsastree | |
departmentsastree |
Starting from WMS 5.04.20220309.1, the Colleagues tab in Collaboration shows only the list of Departments and there is possibility to create a multilevel hierarchy of Departments and display them in a tree view.
...
Note |
---|
The support starts from WMS 5.04.20220309.1 |
By default, only people added to rosterare shown on the Colleagues tab. To display all users registered on the PBX, add the following line to the /rw2/etc/env.custom.ini file:
...
For this, set the following parameters in the /rw2/etc/env.custom.ini file:
Setting on mobile | Parameter | Default value | Possible values |
---|---|---|---|
Disable SIP mode | COLLABORATION_MOBILE_DISABLE_SIP_MODE | false | true | false |
Enable WebRTC | COLLABORATION_MOBILE_ENABLE_WEBRTC | false | true | false |
Firewall bypass (beta) | COLLABORATION_MOBILE_FIREWALL_BYPASS | off | auto | on | off |
Outgoing calls via Wildix | COLLABORATION_MOBILE_OUTGOING_CALLS_VIA_WILDIX | false | true | false |
Run in background | COLLABORATION_MOBILE_RUN_IN_BACKGROUND | false | true | false |
User status when talking on mobile | COLLABORATION_MOBILE_USER_STATUS_WHEN_TALKING_ON_MOBILE | false | true | false |
Native Calls Support | COLLABORATION_MOBILE_NATIVE_CALLS_SUPPORT | false | true | false |
Mic gain | COLLABORATION_MOBILE_MIC_GAIN | 0 | -4..12 |
Activate DND mode | COLLABORATION_MOBILE_ACTIVATE_DND_MODE | false | true | false |
More about advanced settings on mobile: Appendix 3: Advanced Settings
...
It can be changed in the config file /etc/kamailio/cfg.d/host_specific_custom.cfg.
3. Avoid an issue in which WP phones of Call group members continue to ring after the call was answered
Such an issue may occur in case of large amount of call group members with "Colleague" BLF buttons configured.
Edit the file /etc/callweaver/sip-general-custom.conf by adding the parameter:
Code Block skip_cg_members_early_state_presence=yes
Available values:no - the feature is disabled; yes - the feature is enabled. When the parameter is enabled, sending PUBLISH messages is skipped.
2. Reload PBX engine:
Code Block |
---|
callweaver -rx "sip reload" |
Modify direct SDES-SRTP
Anchor | ||||
---|---|---|---|---|
|
...
The option allows setting a specific GSM gateway for SMS sending for each separate user:
Edit the config file /etc/wildix/smsd-route.conf by specifying user extension and MAC address of GSM gateway, for example:
Code Block 101,9c7533014b00 102,9c7533014b00 103,9c7533014b00 104,9c7533014b01
...
Note |
---|
Note: Starting from WMS 5.04.20220309.1, in case you have several streams, modify the parameter [radio] to [radio1], [radio2], etc. in the config file and choose the corresponding option ("radio1", "radio2") when setting music on hold in the Dialplan. |
...
Create a new config file template.conf including GTM ID in the file /rw2/etc/pbx/, for example, use the command:
Code Block echo 'gtm=GTM-12345678' > template.conf
where 123445678 is Google Tag Manager ID.
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
ECM is enabled by default. To disable it, add the following line in /etc/callweaver/res_fax_custom.conf:
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
Maximum transmission speed
...