Scroll export button | ||||||||
---|---|---|---|---|---|---|---|---|
|
Info |
---|
The List of custom config parameters that allow changing various settings in config files. Created: August 2018 Updated: July 2023 Permalink: https://wildix.atlassian.net/wiki/x/Fh3OAQ |
Table of Contents |
---|
To make any changes to config files, access them via SSH as root:
...
Note |
---|
|
Collaboration
Disable file transfer in Collaboration chat messages
...
Change the default Departments tree separator Anchordepartmentsastree departmentsastree
departmentsastree | |
departmentsastree |
Starting from WMS 5.04.20220309.1, the Colleagues tab in Collaboration shows only the list of Departments and there is possibility to create a multilevel hierarchy of Departments and display them in a tree view.
...
Note |
---|
The support starts from WMS 5.04.20220309.1 |
By default, only people added to rosterare shown on the Colleagues tab. To display all users registered on the PBX, add the following line to the /rw2/etc/env.custom.ini file:
...
The option allows setting a specific GSM gateway for SMS sending for each separate user:
Edit the config file /etc/wildix/smsd-route.conf by specifying user extension and MAC address of GSM gateway, for example:
Code Block 101,9c7533014b00 102,9c7533014b00 103,9c7533014b00 104,9c7533014b01
...
Enable location-based MFA
Note |
---|
The support starts from WMS 6.03. |
It is possible to enable the location-based multi-factor authentication that requests user to confirm IP address via email when logging in to Collaboration or using basic authorization from a new IP address.
...
Note |
---|
Note: Starting from WMS 5.04.20220309.1, in case you have several streams, modify the parameter [radio] to [radio1], [radio2], etc. in the config file and choose the corresponding option ("radio1", "radio2") when setting music on hold in the Dialplan. |
...
Code Block |
---|
MAX_ALLOWED_DAY_RANGE=50 |
Modify Inactivity Timer
By default, after 10 minutes of inactivity, x-caracal page needs to be refreshed. Starting from WMS 6.03, it is possible to modify its inactivity timeout.
To modify the timeout, add the following parameter to /var/www/x-caracal/.env file:
Code Block |
---|
INACTIVITY_TIMEOUT_MINUTES = 120 |
- Where 120 is the timeout in minutes (enter the preferred value)
The Maximum value is 600 (10 hours). In case you set the inactivity timeout to 0, it gets disabled.
...
Create a new config file template.conf including GTM ID in the file /rw2/etc/pbx/, for example, use the command:
Code Block echo 'gtm=GTM-12345678' > template.conf
where 123445678 is Google Tag Manager ID.
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
ECM is enabled by default. To disable it, add the following line in /etc/callweaver/res_fax_custom.conf:
...
Note |
---|
Note: The support starts from WMS 5.04.20220309.1. |
Maximum transmission speed
...